FLIGHT PATH
Home History Military Commercial Space Main Site

Press ESC to close

The Fascinating History of The Data Would Apply To Their

TT Editor 5 min read
The Fascinating History of The Data Would Apply To Their

The Fascinating History of The Data Would Apply To Their (Image: NASA)

The Fascinating History of The Data Would Apply To Their

Welcome to another journey through aviation history! In this article, we explore some incredible early developments in aeronautics.

Key Takeaways

  • the data would apply to their wings, which had a different shape. The Wrights took
  • a huge step forward and made basic wind tunnel tests on 200 scale-model wings of

The Full Story

the data would apply to their wings, which had a different shape. The Wrights took a huge step forward and made basic wind tunnel tests on 200 scale-model wings of many shapes and airfoil curves, followed by detailed tests on 38 of them. An important discovery was the benefit of longer narrower wings: in aeronautical terms, wings with a larger aspect ratio (wingspan divided by chord – the wing's front-to-back dimension). Such shapes offered much better lift-to-drag ratio than the stubbier wings the brothers had tried so far. With this knowledge, and a more accurate Smeaton number, the Wrights designed their 1902 glider. The wind tunnel tests, made from October to December 1901, were described by biographer Fred Howard as "the most crucial and fruitful aeronautical experiments ever conducted in so short a time with so few materials and at so little expense". In their September 1908 Century Magazine article, the Wrights explained, "The calculations on which all flying machines had been based were unreliable, and ... every experiment was simply groping in the dark ... We cast it all aside and decided to rely entirely upon our own investigations." The 1902 glider wing had a flatter airfoil, with the camber reduced to a ratio of 1-in-24, in contrast to the previous thicker wing. The larger aspect ratio was achieved by increasing the wingspan and shortening the chord. The glider also had a new structural feature: A fixed, rear vertical rudder, which the brothers hoped would eliminate turning problems. However, the 1902 glider encountered trouble in crosswinds and steep banked turns, when it sometimes spiraled into the ground – a phenomenon the brothers called "well digging". According to Combs, "They knew that when the earlier 1901 glider banked, it would begin to slide sideways through the air, and if the side motion was left uncorrected, or took place too quickly, the glider would go into an uncontrolled pivoting motion. Now, with vertical fins added to correct this, the glider again went into a pivoting motion, but in the opposite direction, with the nose swinging downward." Orville apparently visualized that the fixed rudder resisted the effect of corrective wing-warping when attempting to level off from a turn. He wrote in his diary that on the night of October 2, "I studied out a new vertical rudder". The brothers then decided to make the rear rudder movable to solve the problem. They hinged the rudder and connected it to the pilot's warping "cradle", so a single movement by the pilot simultaneously controlled wing-warping and rudder deflection. The apparatus made the trailing edge of the rudder turn away from whichever end of the wings had more drag (and lift) due to warping. The opposing pressure produced by turning the rudder enabled corrective wing-warping to reliably restore level flight after a turn or a wind disturbance. Furthermore, when the glider banked into a turn, rudder pressure overcame the effect of differential drag and pointed the nose of the aircraft in the direction of the


This article was adapted from public domain historical archives to bring you accessible, plain English history.

Share: Twitter Facebook WhatsApp